D-Link DES-3226 User Manual page 80

This screen allows you to reauthenticate a port or group of ports. The table also displays the current
status of the port(s) once you press START.
This screen displays the following information:
•
Port – The port number.
•
AuthState – The Authenticator PAE State will display one of the following: Initialize,
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth,
and N/A.
•
BackendState – The Backend Authentication State will display one of the following: Request,
Response, Success, Fail, Timeout, Idle, Initialize, and N/A.
•
AdmDir – The Administrative Controlled Directions are both and in.
•
OprDir – The Operational Controlled Directions are both and in.
•
PortStatus – The status of the controlled port can be authorized, unauthorized, or N/A.
•
PortControl – The controlled port can be forceUnauthorized, auto, or forceAuthorized.
Configure 802.1X – Authenticator Configuration
Select Configure Authenticator on the PAE Configuration menu and press Enter to access the
following screen:
Figure 6-44. Reauthenticate Ports(s) menu
70
DES-3226 NWay Standalone Fast Ethernet Switch User's Guide