Side Panels; Optional 100Base And 1000Base Extension Modules - D-Link DES-3226 User Manual

DES-3226 NWay Standalone Fast Ethernet Switch User's Guide
•
The AC power connector is a standard three-pronged connector that supports the power cord.
Plug-in the female connector of the provided power cord into this socket, and the male side of the
cord into a power outlet. Supported input voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz.

Side Panels

The right side panel of the Switch contains two system fans (see the top part of the diagram below). The
left side panel contains heat vents.
•
The system fans are used to dissipate heat. The sides of the system also provide heat vents to
serve the same purpose. Do not block these openings, and leave at least 6 inches of space at the
rear and sides of the switch for proper ventilation. Be reminded that without proper heat
dissipation and air circulation, system components might overheat, which could lead to system
failure.

Optional 100BASE and 1000BASE Extension Modules

The Switch is able to accommodate a range of optional plug-in modules in order to increase
functionality and performance. These modules must be purchased separately.
Figure 3-3. Side panel views of the Switch
9