Setup; Onscreen Display Menu System - Marantz SR5003 User Manual

ENGLISH

SETUP

After all components are connected, initial setup
must be performed.

ONSCREEN DISPLAY MENU SYSTEM

This unit incorporates an onscreen menu system,
which makes various operations possible by using
the cursor (3, 4, 1 , 2) and ENTER buttons on the
remote controller or on the front panel.
Note:
• To view the onscreen displays, make certain you
have connected the MONITOR OUT jack on the rear
panel to the composite, S-Video, component video
or HDMI input of your TV or projector. (See page
13, 14)
1.
Press the AMP button on the remote controller.
(This step is not needed when operating the
setup menus from the unit.)
2.
Press the MENU button on the remote controller
or press the MENU button on the front panel.
The "MAIN MENU" of the OSD menu system is
displayed.
There are 6 items in the MAIN MENU.
3. Select the desired sub-menu with the 3 or 4
cursor buttons and press the ENTER button.
The display will change to the selected sub-
menu.
Notes:
• If you desire to adjust any sub-menu, you need to set
it to UNLOCKED.
• To lock sub-menus, set items 1-6 on the MAIN
MENU to "LOCKED".
<LOCKING SUBMENUS>
(1) Move the cursor to "1. INPUT SETUP" in the
MAIN MENU.
(2) Select the "0" mark left of "LOCKED" with the 1
or 2 cursor buttons.
4.
To exit from OSD menu system, press the
EXITbutton, or move the cursor to EXIT and
press the ENTER button.
24
RC004SR BUTTON CONTROL
TOP button
Pressing this button returns you to the
Main MENU of the OSD menu system.
LEFT button
ENTER button
MENU button
Press this button to display the OSD
menu system.
SR5003 FRONT BUTTON CONTROL
MENU button
Press this button to display the OSD
menu system.
LEFT button
AMP (Amplifi er) button
UP button
RIGHT button
EXIT button
Press this button to exit the OSD menu system.
DOWN button
UP button
EXIT button
Press this button to exit the OSD menu system.
RIGHT button
ENTER button
DOWN button