Battery Power - Sharp MD-SR75H Operation Manual

Battery Power

To wall socket
AC 230-240V,
50/60 Hz
30
Web-site: www.sharp.co.uk/support
Charging the rechargeable battery
When the rechargeable battery is used for the first
1
time or when you use it after a long period of disuse,
be sure to charge it fully.
1
Slide the battery cover as far as it will go
2
to the outside.
2
Lift the battery cover.
Do not force the battery cover open too far.
3
Insert the rechargeable battery from the
(+) marked side.
A rechargeable battery other than the one sup-
plied or the separately available one (AD-N70BT)
cannot be charged.
4
Close the battery cover.
5
Plug the AC adaptor into the wall socket,
To the DC IN and then insert the plug on the other end
into the DC IN 5V socket.
5V socket
6
Press the :OFF/CHRG (• ) button.
"
(Refer to the next page for the charging time.)
Help Line: 0990 274277 (office hours)
" will flash, and battery will begin charging.