Playing Music; Playing A Track In Another Folder; Listening To The Radio; Presetting Stations Automatically - Panasonic SABTT268 Owner's Manual

Playing music

[DVD] [CD]
(DVD-R/R DL, music CD, CD-R/RW)
1
Insert the media.
If the menu is displayed, press [OK] or [3, 4, 2, 1] to
select the item. (
2
Press [3, 4] to select the track and press
[OK].
DIRECT NAVIGATOR
CD
Play
RETURN
" " indicates the track currently playing.
Playing a track in another
folder
1
While the DIRECT NAVIGATOR screen is displayed
Press [SUB MENU].
2
Press [3, 4] to select "Select Folder" and
press [OK].
≥ You cannot select folders that contain no compatible tracks.
VQT3M40
24
18)
0.09 4.30
Music list
Track1
5 Tracks / Total Play Time 20min54sec
No. Track Name Play Time
Track1 4min30sec
01
02 Track2 3min41sec
03 Track3 4min30sec
04 Track4 3min11sec
05 Track5 5min 2sec

Listening to the Radio

Radio
Presetting stations
automatically
Up to 30 stations can be set.
1
Press [RADIO] to select "FM".
2
Press [STATUS] to select the position to
start the auto preset search.
LOWEST:
To begin auto preset with the lowest frequency (FM87.9 or
FM87.5).
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to "Presetting stations
manually".
3
Press and hold [OK].
Release the button when "AUTO" is displayed.
The tuner starts to preset all the stations it can receive into
the channels in ascending order.
≥ "SET OK" is displayed when the stations are set, and the radio tunes to the
last preset station.
≥ "ERROR" is displayed when automatic presetting is unsuccessful. Preset
the stations manually.

Presetting stations manually

Preparation
Select a radio broadcast.
1 Press [RADIO] to select "FM".
2 Press [SEARCH6] or [SEARCH5] to select the
frequency.
≥ To start automatic tuning, press and hold [SEARCH6], [SEARCH5]
until the frequency starts scrolling. Tuning stops when a station is found.
1
While listening to the radio broadcast
Press [OK].
2
While "P" is flashing on the display
Press the number buttons to select a
channel.
To select a 1-digit number
e.g., 1: [1] [OK].
To select a 2-digit number
e.g., 12: [1] [2]
≥ A station previously stored is overwritten when another station is stored in
the same channel preset.