Network Easy Setting; Reprogramming The Remote Control; Firmware Updates - Panasonic SABTT268 Owner's Manual

Network Easy Setting

The configuration of your network is about to begin. If you
failed to make the settings, refer to "When you experience
problems with settings".
When you experience problems
with settings
Network Easy Setting (Home Network Connection Check)
Network Easy Setting (Home Network Connection Check)
Complete.
1. LAN cable connection : Fail
2. IP address setting : Fail
3. Connection to gateway : Fail
LAN cable is not connected.
Please check the connection.
Select "Yes" and press [OK] to check network
connection again. Select "No" and press [OK]
to finish Network Easy Setting.
Yes
OK
Display
1. LAN cable connection
2. IP address setting
3. Connection to gateway
1. LAN cable connection
2. IP address setting
3. Connection to gateway
1. LAN cable connection
2. IP address setting
3. Connection to gateway
Network Easy Setting (Internet Connection Check)
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet : Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the owner's manual for the cause of
the error and the solution for it.
Press [OK].
OK
Display
Cannot find the server. ≥ "Primary DNS" and "Secondary
(Error code: B019)
Failed to connect to the ≥ The server may be busy or the
server.
(Error code: B020)
≥ Settings of "Proxy Server
No
Check the
following
:Fail ≥ Connection of
the LAN
:Fail
cables (
:Fail
:Pass ≥ Connection
and settings of
:Fail
the hub and
:Fail
router
:Pass
≥ Settings of "IP
:Pass
Address /
:Fail DNS Settings"
( 34)
Check the following
DNS" Settings of "IP Address /
DNS Settings" ( 34)
service may have been
suspended. Please wait a few
moments, and then try again.
Settings" ( 34) and the router.
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting "Network Easy Setting" in
the Setup menu. ( 34)
≥ You can redo these settings individually using "Network Settings". (
≥ Please be aware that connecting to a network without encryption may
result in the content of the communication being illegitimately viewed by a
third party, or the leaking of data such as personal or secret information.
Reprogramming the remote
control
If you have more than one Panasonic player/recorder and the
remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. (

Firmware updates

Occasionally, Panasonic may release updated firmware for this
unit that may add or improve the way a feature operates.
These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
15)
When a new firmware version is available, the following
message is displayed.
Please update firmware in Setup.
To update the firmware
Press [HOME] select "Others"
select "Others"
[OK] select "Update Now"
DO NOT DISCONNECT the unit from the AC power or perform
any operation while the update takes place.
After the firmware is installed, "FINISH" will be displayed on the
unit's display. Unit will restart and the following screen will be
displayed.
≥ If downloading on this unit fails or this unit is not connected to the
Internet, then you can download the latest firmware from the
following website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
≥ Downloading will require several minutes. It may take longer or may
not work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set "Automatic
Update Check" to "Off". (
34, "Remote Control Code")
New firmware is available.
[OK] [OK] ("Setup")
[OK] select "Firmware Update"
[OK]
The firmware was updated.
: x.xx
Current Version
OK
RETURN
34, "System Information")
34)
34)
VQT3M40
17