Setting Time And Date [Time & Date] - Olympus VN-701PC Detailed Instructions

Setting time and date [ Time & Date ]
If you set the time and date beforehand,
the information when the file is recorded is
automatically stored for each file. Setting
the time and date beforehand enables easier
file management.
When you install batteries for the
1
first time or each time you replace
the batteries, the "Hour" indication
will flash.
Press the 9 or 0 button to
1
select the item to set.
• Select the item from the " Hour ",
" Minute ", " Year ", " Month " and " Day "
with a flashing point.
2 Press the + or − button to set.
EN
12
3 Repeat steps 1 and 2 to set the
other items.
9 or 0 button:
Move to the previous/next item.
+ or − button:
Change the value.
• You can select between 12 and
24 hour display by pressing the
FOLDER/INDEX button while setting
the hour and minute.
• You can select the order of the
" Month ", " Day " and " Year " by
pressing the FOLDER/INDEX button
while setting them.
Press the ` OK button to
4
complete the setting.
• The clock will start from the set date
and time. Press the ` OK button
according to the time signal.
Notes
• If you press the ` OK button during the
setup operation, the recorder will save
the items that were set to that point.
• While the recorder is in stop mode, press
and hold the STOP ( 4 ) button to display
[ Time & date ] and [ Remain ].
Changing the time and date
Select [ Time & Date ] from the menu on
the [ Device Menu ].
• See "[ Menu setting method ]"
( ☞ P.26)