Setting An Index Mark Or A Temp Mark - Olympus VN-701PC Detailed Instructions

Press the ` OK button.
3
• Even if playback is stopped, the
changed playback speed will be
retained. The next playback will be at
that speed.
3
About the limits of fast playback
Normal operation may not be available
depending on the sampling frequency
and the bit rate of the file to be played
back. In such a case, reduce the speed of
the fast playback.
Notes
• As in normal playback mode, you can
stop playback, cue a file, or insert an
index or temp mark in slow playback and
fast playback modes as well.
• The slow playback or fast playback is
available even if [ Voice Filter ] is set
( ☞ P.32).
• When using the slow playback or
fast playback function, the following
functions are not available.
EN
22
Setting an index mark or a temp
mark
If index marks and temp marks are placed,
you can quickly find a location you want to
listen to in fast forward and fast rewind and
when cuing a file. Index marks cannot be
placed on files created on machines other
than this recorder, but temp marks can be
placed instead to temporarily remember
desired locations.
1 While the recorder is in recording
mode or playback mode, press
the FOLDER/INDEX button.
• Even after an index or temp mark is
placed, recording or playback will
continue so you can place index or
temp marks in other locations in a
similar manner.
Playback