Front Panel Display; Remote Control - Yamaha RX-V2065BL Owner's Manual

Part names and functions

Front panel display

a b c
SIRIUS
XM
OUT 1 OUT 2
l
a
HDMI indicator
Lights up during normal communication when HDMI is
selected as an input source.
OUT 1/OUT 2 indicators
The respective indicator lights up when HDMI signals are
output from the HDMI OUT 1/2 jacks.
b
XM indicator
Lights up when an XM tuner is selected as an input source.
c
SIRIUS indicator
Lights up when a SiriusConnect tuner is selected as an input
source.
d
HD indicator
Lights up when this unit is tuned into the HD Radio reception
band (page 33).
e
TAG indicator
Lights up when the selected HR Radio program (or song being
played) supports the iTunes Tagging feature (page 33).
f
CINEMA DSP indicator
Lights up when a sound field program that uses CINEMA DSP
is selected.
g
CINEMA DSP 3D indicator
Lights up when CINEMA DSP 3D is activated.
h
Tuner indicator
Lights up during receiving radio broadcast signals from an FM/
AM station (page 31).

Remote control

Note
• Before installing batteries or using the remote control, make sure that you read "Notes on remote controls and batteries" in the "Caution" section.
■
Installing batteries
a
a Take off the battery compartment cover.
b Insert the two supplied batteries (AAA, R03, UM-4)
according to the polarity markings (+ and -) on the
inside of the battery compartment.
c Snap the battery compartment cover back into the
place.
6
En
d e
HD TAG
c
b
f g h
STEREO
3
TUNED
m
i
ZONE2/ZONE3 indicator
Lights up when Zone2 or Zone3 is turned on.
j
SLEEP indicator
Lights up when the sleep timer is activated (page 53).
k
MUTE indicator
Flashes when audio is muted.
VOLUME indicator
Displays volume levels.
l
Cursor indicators
Light up if corresponding cursors on the remote control are
available for operations.
m
Multi information display
Displays menu items and settings for the current operation.
n
Speaker indicators
Indicate speaker terminals from which signals are currently
output.
Subwoofer
Presence L
Front L
Surround L
Surround back L
■
Operation range
The remote control transmits a directional infrared ray. Be
sure to aim the remote control directly at the remote
control sensor on this unit during operation.
within 6 m (20 ft)
i j k
VOL.
SLEEP
ZONE ZONE
2 3
MUTE
PL
L
SL
SBL SB SBR
l
Center
SW
PL PR
Presence R
C
L R Front R
SL SR
Surround R
SBL SB SBR
Surround back R
Surround back
Remote control sensor window
30 30
SW
PR
C
R
SR
n