Memory Guard - Yamaha RX-V2065BL Owner's Manual

Operating various settings for this unit (Setup menu)
Reverb Level
Adjustable range: 0 to100%
Reverb Level parameter adjusts the reverberation sound
level. Increasing the value of Reverb Level makes the
reverbration sound level higher, which allows you to
create more echo.
Source sound
(dB)
Parameters for certain sound field
programs
■
Parameter for MOVIE sound field programs
Decode Type
Choices: PLIIx Movie (PLII Movie), Neo:6 Cinema
Selects the decoder type for use with the MOVIE sound
field programs.
Note
• You cannot select a decoder for the following MOVIE sound field
programs.
– Mono Movie
– Sports
– Action Game
– Roleplaying Game
■
Parameter for 2ch Stereo
Direct
Choices:
Auto*, Off
Automatically bypasses the DSP circuit and tone control
circuit when an analog sound source is selected as the
input source. You can enjoy a higher quality sound.
Auto Outputs sound by bypassing the DSP circuit and
tone control circuit when the "Bass" and "Treble"
tone controls are both set to 0 dB.
Off Do not bypass the DSP circuit and tone control.
■
Parameters for 7ch Stereo
Center Level / Surround L Level / Surround R
Level / Surround Back Level / Presence L Level /
Presence R Level
Adjustable range: 0 to 100%
Adjusts the volume of the center, surround L/R, surround
back and presence L/R channels in the 7ch Stereo
program. The available parameters differ depending on the
setting of the speakers.
68
En
Reverb Level
Time
■
Parameter for Straight Enhancer and 7ch
Enhancer
Effect Level
Choices:
High*, Low
Adjusts the Compressed Music Enhancer effect level.
When the high-frequency signals of the source is
emphasized too much, set the effect level to "Low". To
reduce the effect, set this parameter to "Low".
Decoder parameters
You can customize decoder effects by setting the
following parameters. For details about the types of
decoders, see "Surround decode mode" (page 29).
■
Parameter for PLIIx Music and PLII Music
Panorama
Choices:
Off*, On
Adjusts the soundscape of the front sound field. Sends
stereo signals to the surround speakers as well as the front
speakers for a wraparound effect.
Dimension
Adjustable range: –3 to STD* to +3
Adjusts the difference in level between the front sound
field and the surround sound field. You can adjust the
difference in level created by the software being played
back to obtain the preferred sound balance. The surround
sound gets stronger as you make the value more negative
and the front sound gets stronger as you make the value
more positive.
Center Width
Adjustable range: 0 to 3* to 7
You can spread the center sound toward left and right
according to your preference. Set this parameter to 0 for
outputting the center sound from the center speaker only,
or to 7 for outputting it from the front left/right speaker.
■
Parameter for Neo:6 Music
Center Image
Adjustable range: 0.0 to 0.3* to 1.0
Adjusts the front left and right channel output relative to
the center channel to make the center channel more or less
dominant as necessary.

Memory Guard

Choices:
Off*, On
Protects the Setup menu settings against accidental
alteration.
Off Not protect settings.
On Protects the Setup menu settings (except for
"Decode Type" in "DSP Parameter" and
"Memory Guard").
Note
• When this parameter is switched to "On", "
corner of the Setup menu screen.
" appears at the top left