Dsp Parameter; Network Standby; Rhapsody Information; Account Status - Yamaha RX-V2065BL Owner's Manual

On Permit access to this unit only from network
devices with the specified MAC addresses.
MAC Address 1-10
Specify MAC addresses of network devices that are
permitted to access to this unit when "MAC Address
Filter" is set to "On".
■

Network Standby

Choices: Off*, On
Selects whether or not to accept the commands via
network when this unit is on standby.
Off Not accept the commands via network.
On Accept the commands via network.
y
• When "Network Standby" is set to "On", the amount of power
consumption in the standby mode increases.
■
Information
Displays the network parameters (IP address, etc.) or
vTuner ID assigned to this unit.

Rhapsody Information

You can set your Rhapsody
For information about the Rhapsody
®
play back Rhapsody contents, see "Using the Rhapsody
service" (page 51).
■

Account Status

Displays the registration status of your Rhapsody
account. If "Not Available" appears, check the network
settings.
■

Sign In

Use this menu to register your Rhapsody
your user name and password provided by Rhapsody
start registration, follow steps 3 and 4 in "Account setup
®
for Rhapsody "(page 51).
If an error message appears (page 84), confirm your user
name and password and then try again.
■

Rhapsody Free Trial

Use this menu to subscribe to the Rhapsody
using 30-day free trial. To subscribe to the free-trial
service, read the description on the GUI screen and then
select "Yes" if you accept the terms and conditions.
If you have subscribed to the free trial service, the
remaining service days and account number (required for
®
receiving Rhapsody support) appear on the GUI screen.
■

Remove Account

®
Removes your Rhapsody
®
account.
®
service and how to
®
®
account with
®
. To
®
service
account.
Operating various settings for this unit (Setup menu)

DSP Parameter

Although the field sound programs would satisfy you as
they are with the default parameters, you can arrange
sound effect or decoders suitable for acoustical conditions
of sources or rooms by setting the parameters.
1
Press jCursor k / n to select "DSP
Parameter" and then press jENTER.
Sound field program
Program Name
Decode Type
P. Initial Delay
P. Room Size
Sur. Initial Delay
Sur. Room Size
Sound field parameters
2
Press jCursor k / n to select "Program
Name" and then press jCursor l / h to
select a sound field program to edit.
®
3
Press jCursor k / n to select a parameter to
edit and then press jCursor l / h to
change the setting.
y
• Repeat steps 2 and 3 to change other sound field program
parameters.
To initialize the parameters of the selected sound field
program, press jCursor n repeatedly to select
"Initialize" and then press jCursor h. Then, press
jCursor h again to execute the initialization or
jCursor l to cancel it.
CINEMA DSP basic parameters
DSP Level
Adjustable range: –6dB to 0dB* to +3dB
Fine adjusts an effect level (level of the sound field effect
to be added). You can adjust the level of the sound field
effect while checking sound levels. Adjust "DSP Level" as
follows.
• The effect sound is too soft.
• There are no differences between effects of the sound
field programs.
→Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→Reduce the effect level.
DSP Parameter
Sci-Fi
PLIIx Movie
DSP Level 0dB
16ms
1.0
2ms
1.0
Set values
65
En