Trouble - Shooting Guide /5 - Beko WSA 24000 Instructions For Use Manual

GB
9. Clean the outside part of the refrigerating
circuit (compressor, condenser, connection,
tubes) by a soft brush or by the vacuum-
cleaner. During this operation, please take
care not to distort the tubes or to remove the
cables.
10. When you finish the cleaning arrange the
accessories at their place and connect the
appliance to the mains.
Trouble-shooting guide
Appliance does not work
There is an energy cut-off.
The plug of the supply cord is not well
inserted in the socket.
The fuse is blown.
The thermostats is on position Stop (O).
The appliance does not cool
There was an energy cut-off for a longer
period of time.
Fresh food was introduced to be frozen.
The appliance was not placed correctly.
The appliance is too near of a heat source.
The thermostat button is not on the correct
position.
Ambient temperature is too high.
The inside lighting does not work when the
compressor is running
The lamp is blown. Unplug the appliance,
take out the lamp and replace it with another
and assemble.
The switch is on off position or aut of order.
The switch is not acted.
The appliance is too noisy
The appliance was not installed properly.
The back pipes are touching or vibrating.
There is a contact between the bottles or
other vessels inside.
There is water on the inside of the cabinet
linear.
The water drainage channel is clogged.
If you followed the above-mentioned
information and did not succeed to find the
failure, please contact the Service.
Warning!
Do not attempt at any time to repair the
appliance or its electric components yourself.
Any repair done by an unskilled person is
dangerous for the user and can lead to
warranty loss.
5
Instruction for use