Additional Operations - Yamaha HTR-6050 Owner's Manual

Additional operations

■ Selecting the component connected to
the MULTI CH INPUT jacks as the input
source
Press D INPUT l / h repeatedly (or press
A MULTI CH IN) so that "MULTI CH" appears in
the front panel display.
y
Use "MULTI CH SET" menu in "INPUT MENU" to set the
parameter for MULTI CH INPUT (see page 54).
Notes
• Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks is selected as the
input source.
• When headphones are used, signals are output only from the
front left and right channels.
■ Selecting the front speaker set
Use this feature to select the front speaker system
(FRONT A or FRONT B).
Press 9 SPEAKERS on the front panel
repeatedly to turn on or off the set of front
speakers connected to the FRONT A or FRONT B
speaker terminals.
The activate front speaker set changes as follows:
FRONT A
Note
Turn off the volume level of this unit when you switch the front
speaker setting.
FRONT B
Off
■ Using the Zone B feature
When you set "FRONT B" to "ZONE B" (see page 48),
you can use the speakers connected to the FRONT B
speaker terminals in another room (Zone B).
Press 9 SPEAKERS on the front panel
repeatedly to turn on or off the Zone B speakers.
When you activate the Zone B speakers, all the speakers in
the main room are muted.
Notes
• You cannot activate both the main room and Zone B speakers
simultaneously.
• If you select CINEMA DSP sound field program and activate
the Zone B speakers, Virtual CINEMA DSP activates
automatically (see page 38).
■ Selecting audio input jacks
(AUDIO SELECT)
This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch between input
jacks when more than one input jack is assigned to the
same input source.
y
• We recommend setting audio input jack select to "AUTO" in
most cases.
• You can adjust the default audio input jack select of this unit by
using "AUDIO SELECT" in "OPTION MENU" (see page 55).
Press E AUDIO SELECT (or B AUDIO SEL)
repeatedly to select the desired audio input jack
select setting.
DVR V-AUX DTV/CBL
USB
A.SEL: AUTO
Audio input jack
select setting
AUTO
Automatically selects input signals in the
following order:
(1) Digital signals
(2) Analog signals
ANALOG
Selects only analog signals. If no analog
signals are input, no sound is output.
Note
This feature is not available when no digital input jacks are
assigned to the currently selected input source.
Playback
DVD MD/CD-R TUNER CD
33
En