Input Menu - Yamaha HTR-5935 Owner's Manual

SET MENU

2 INPUT MENU

Use this menu to reassign the input jacks, select the input
mode or rename the input source.
Input assignment
A)INPUT ASSIGN
Use this feature to assign the input jacks according to the
component to be used if the initial settings of this unit do
not correspond to your needs. Change the following
parameters to reassign the respective jacks and effectively
connect more components.
Once the input jacks are reassigned, you can select the
corresponding component by using the INPUT selector on
the front panel (or the input selector buttons on the remote
control).
For COMPONENT VIDEO jacks A, B and C
C.V[A]
C.V[B]
C.V[C]
Choices: [A] DVD, DTV/CBL, V-AUX, DVR
[B] DVD, DTV/CBL, V-AUX, DVR
[C] DVD, DTV/CBL, V-AUX, DVR
For OPTICAL INPUT jacks 1and 2
IN (1)
IN (2)
Choices: (1) CD, MD/CDR, DVD, DTV/CBL, V-AUX,
DVR
(2) CD, MD/CD-R, DVD, DTV/CBL, V-AUX,
DVR
For COAXIAL INPUT jack 3 COAXIAL IN (3)
Choices: (3) CD, MD/CD-R, DVD, DTV/CBL, V-AUX,
DVR
Notes
• You cannot select a specific item more than once for the same
type of jack.
• When you connect a component to both the DIGITAL INPUT
(COAXIAL) and DIGITAL INPUT (OPTICAL) jacks, priority
is given to the signals input at the DIGITAL INPUT
(COAXIAL) jack.
78
Input mode B)INPUT MODE
Use this feature to set this unit to reset "INPUT MODE"
back to "AUTO" (see page 31) regardless of the previous
setting or to recall the last input mode ("AUTO", "DTS",
or "ANALOG") used for that source whenever you turn on
this unit.
Choices: AUTO, LAST
• Select "AUTO" to reset "INPUT MODE" back to
"AUTO" (see page 31) regardless of the previous
setting whenever you turn on this unit. This unit
automatically selects input signals in the following
order:
(1) Digital signals
(2) Analog signals
• Select "LAST" to set this unit to automatically recall
the last input mode ("AUTO", "DTS", or "ANALOG")
used for that source whenever you turn on this unit.
Input rename C)INPUT RENAME
Use this feature to change the name of the input source
that appears in the front panel display.
The following is an example where "DVD" is renamed
"My DVD".
DVR V-AUX
SP
A
DVD
1
Press one of the input selector buttons on
the remote control to select the input source
you want to change the name of.
CD MD/CD-R
DVD DTV/CBL
2
Press AMP and then press j / i on the remote
control to place the "_" (underscore) under
the space or the character you want to edit.
AMP
pDVD
DTV/CBL MD/CD-R TUNER CD XM
My DVD
L C R
SL
TUNER XM
DVR V-AUX
ENTER
A-E/CAT. A-E/CAT.
PRESET/CH
VOLUME
dB
SR