Yamaha HTR-5935 Owner's Manual page 70

SOUND FIELD PROGRAMS
Sound field parameter
REV.LEVEL
2ch Stereo
DIRECT
5ch Stereo
CT LEVEL
SL LEVEL
SR LEVEL
66
Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the
stronger the reverberation becomes.
Control range: 0 to 100%
Source sound
(dB)
REV.DELAY
2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo
sound when playing 2-channel analog sources.
Choices: AUTO, OFF
y
• The "AUTO" setting bypasses the decoders and DSP processors only when "BASS" and
"TREBLE" are set to 0 dB (see page 29).
• When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2
channels and output from the front left and right speakers.
• The low-frequency signals input from the front left and right speakers are redirected to the
subwoofer in the following cases:
– "BASS OUT" is set to "BOTH" (see page 75).
– "FRONT" is set to "SMALL" (see page 75) and "BASS OUT" is set to "SWFR" (see
page 75).
5-channel stereo center, surround left, surround right, levels. Adjusts the volume level of each channel
in the 5-channel stereo mode.
Control range: 0 to 100%
Features
60 dB
Reverberation
REV.TIME
Time