Set Menu - Yamaha HTR-5935 Owner's Manual

You can use the following parameters in "SET MENU" to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
BASIC SETUP BASIC SETUP
Use this feature to set up your system quickly and with minimal effort (see page 25).
MANUAL SETUP
Use this feature to manually adjust speaker and system parameters.
Sound menu 1 SOUND MENU
Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or
compensate for video signal processing delays when using LCD monitors or projectors.
Parameter
A)SPEAKER SET
B)SP LEVEL
C)SP DISTANCE
D)CENTER GEQ
E)LFE LEVEL
F)D. RANGE
G)AUDIO SET
Input menu 2 INPUT MENU
Use this menu to manually reassign the input jacks, select the input mode or rename the input source.
Parameter
A)INPUT ASSIGN
B)INPUT MODE
C)INPUT RENAME
D)VOLUME TRIM

SET MENU

MANUAL SETUP
Selects the size of each speaker, the speakers for low-frequency signal output, and the
crossover frequency.
Adjusts the output level of each speaker.
Adjusts the delay time of each speaker.
Adjusts the tonal quality of the center speaker.
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
Adjusts the dynamic range of Dolby Digital or DTS signals.
Adjusts the muting level, audio delay and tone bypass settings.
Assigns the input jacks of this unit according to the component to be used.
Selects the initial input mode of the source.
Changes the name of the input source.
Adjusts the output volume of each jack.
Features
Features
SET MENU
Page
75
76
76
77
77
77
77
Page
78
78
78
79
71