Enjoying Pure Hi-Fi Stereo Sound; Displaying The Input Source Information - Yamaha HTR-5935 Owner's Manual

USING OTHER FEATURES

Enjoying pure hi-fi stereo sound

The "DIRECT STEREO" mode allows sources to bypass
the decoders and DSP processors of this unit so that you
can enjoy pure hi-fi sound from 2-channel PCM and
analog sources.
Press AMP and then press DIRECT ST. on the
remote control to select "DIRECT STEREO".
AMP
DIRECT STEREO
Notes
• To avoid unexpected noise, do not play CDs encoded in DTS
when the "DIRECT STEREO" mode is selected.
• When multi-channel signals (Dolby Digital and DTS) are input,
this unit automatically switches to the corresponding analog
input. When "DTS" is selected as the input mode (see page 31),
no sound will be output.
• No sound will be output from the subwoofer.
• "TONE CONTROL" (see page 29) and "SOUND MENU" (see
page 75) settings (except for speaker level settings) are not
effective.
• The front panel display automatically dims.
y
You can also select the "DIRECT STEREO" mode by pressing
the PROGRAM l / h buttons on the front panel repeatedly.
36
DIRECT ST.
8
Displaying the input source
information
You can display the format, sampling frequency, channel,
bit rate, and flag data of the current input signal.
1
Press one of the input selector buttons to
select the desired input source.
CD MD/CD-R
DVD DTV/CBL
2
Press AMP and then press STRAIGHT on the
remote control to select "STRAIGHT".
"
AMP
3
Press u / d to display the information about
the input signal.
A-E/CAT.
TUNER XM
DVR V-AUX
STRAIGHT
ENT.
STRAIGHT
ENTER
A-E/CAT.
PRESET/CH