Yamaha HTR-5935 Owner's Manual page 80

SET MENU
Subwoofer phase SWFR PHASE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices: NRM, REV
• Select "NRM" if you do not want to reverse the phase
of your subwoofer.
• Select "REV" to reverse the phase of your subwoofer.
Speaker level B) SP LEVEL
Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in "SPEAKER SET" (see page 75). The
selected speaker outputs test tone and the speaker
indicator of the speaker flashes.
Control range: –10.0 to +10.0 dB
Control step: 1.0 dB
Initial setting: 0 dB
The following is an example where "FL" is selected to
adjust the balance of the front left speaker.
V-AUX
DVR
SP
A
FL ----||----
• Select "FL" to adjust the balance of the front left
speaker.
• Select "FR" to adjust the balance of the front right
speaker.
• Select "C" to adjust the balance of the center speaker.
• Select "SL" to adjust the balance of the surround left
speaker.
• Select "SR" to adjust the balance of the surround right
speaker.
• Select "SWFR" to adjust the balance of the subwoofer.
Note
"C", "SL", "SR", and "SWFR" cannot be adjusted if "CENTER"
(see page 75), "SUR. LR" (see page 75), and "BASS OUT" (see
page 75) are set to "NONE" respectively.
76
pDVD
DTV/CBL MD/CD-R TUNER
CD XM
VOLUME
L C R
SL
Flashes
Speaker distance
Use this feature to manually adjust the distance of each
speaker and the delay applied to the respective channel.
Ideally, each speaker should be the same distance from the
main listening position. However, this is not possible in
most home situations. Thus, a certain amount of delay
must be applied to the sound from each speaker so that all
sounds will arrive at the listening position at the same
time.
Unit UNIT
Choices: meters (m), feet (ft)
• Select "meters" to adjust speaker distances in meters.
• Select "feet" to adjust speaker distances in feet.
Speaker distances
Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Control step: 0.10 m (0.5 ft)
• Select "FRONT L" to adjust the distance of the front
left speaker.
Initial setting: 3.00 m (10.0 ft)
• Select "FRONT R" to adjust the distance of the front
right speaker.
Initial setting: 3.00 m (10.0 ft)
dB
• Select "CENTER" to adjust the distance of the center
SR
speaker.
Initial setting: 3.00 m (10.0 ft)
• Select "SUR. L" to adjust the distance of the surround
left speaker.
Initial setting: 3.00 m (10.0 ft)
• Select "SUR. R" to adjust the distance of the surround
right speaker.
Initial setting: 3.00 m (10.0 ft)
• Select "SWFR" to adjust the distance of the subwoofer.
Initial setting: 3.00 m (10.0 ft)
Note
"CENTER", "SUR. L", "SUR.R", and "SWFR" cannot be
adjusted if "CENTER" (see page 75), "SUR. LR" (see page 75),
and "BASS OUT" (see page 75) are set to "NONE" respectively.
C)SP DISTANCE