Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
Troubleshooting
The MD 1600 must be serviced by trained engineers.
!
NEVER attempt any repairs or adjustments yourself
— you could make the problem worse and invalidate
the Guarantee.
ALWAYS check
you have followed the steps listed on pages to to
first that:
install and set up your MD 1600
all connectors are firmly inserted in their sockets
mains power is switched on at the socket
the handset's batteries are correctly and securely
installed, and are not run down
Everyday use
"I cannot make
Check that the base unit's mains power adapter is
or answer calls."
plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you're using the telephone line cable that
was supplied with your MD 1600. Other telephone line
cables might not work.
Move the handset closer to the base unit.
Check the Battery Level symbol on the display. If it is
low, replace the handset on the base unit or charger
pod to recharge the batteries.
Switch off power at the mains socket, wait for a few
seconds and then switch back on. This may solve the
problem.
If you still can't make calls, try re-registering the
handset, as described on page 34.
40
E:\Binatone2003\MD1600\MD1600_03.vp
09 June 2003 15:22:16
Advertisement
Table of Contents
