Table of Contents
Advertisement
Quick Links
BINATONE " s2300 System "
User Guide - Back Page
U
SER
s2300 System
Digital Cordless
Telephone with
Answering
Machine,
Ver. 1, Dec, 03
BINATONE " s2300 System"
User Guide - Front Page
1)White background and black letters
2)Material: 100lb Double face art paper
3) Size: 105mm(w) x 148mm(H) A6
G
UIDE
THIS EQUIPMENT IS NOT DESIGNED FOR
MAKING EMERGENCY TELEPHONE CALLS
WHEN THE POWER FAILS. ALTERNATIVE
ARRANGEMENTS SHOULD BE MADE FOR
ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set,
please read these instructions carefully.
Advertisement
Table of Contents
Related Manuals for Binatone DP411
Summary of Contents for Binatone DP411
- Page 1 UIDE s2300 System Digital Cordless Telephone with Answering Machine, THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES. Before operating this set, Ver. 1, Dec, 03 please read these instructions carefully.
-
Page 2: If You Need Help
Emergency Services. (This means that you should also have a basic phone that does not need mains power, connected to your line so that you can make calls during a power failure.) If you need help … The Binatone Help Line is available from 9.00 am to 5.00 pm, Monday to Friday, on... -
Page 3: Where To Find It
Press to store numbers in the Phone Book, and to make calls to stored Base unit telephone keypad numbers For dialling when you make calls using the base unit as a speakerphone. It includes a (Last Number Redial)/ PAUSE SPEAKERPHONE... -
Page 4: Symbols On The Display
Memory/Store Appears when you press the MEMORY button to store a number in memory or to make a call to a stored number. Battery level Shows how fully charged the handset’s batteries are. When it shows ‘Low’, replace the handset on the base unit or charger pod to charge the batteries. -
Page 5: Table Of Contents
To store a Caller Display record in To set a remote security code, 26 To register a handset, 33 memory, 15 Choosing a site for the base unit and To check your messages remotely, 26 To remove To delete a Caller Display record, 15... -
Page 6: Read These Notes First
(phones, fax machines, etc.) connected to Choosing a site The base unit and charger pod should each be placed an exchange line must not add up to more than 4 — for the base on a level surface, in a position where:... -
Page 7: Installation And Set-Up
Leave the handset on the charging cradle for 15 hours. If you have one or more charger pods … Plug the mains adapter into a 230 V AC, The display may show 50 Hz mains socket, with the switch on... -
Page 8: Before You Start
Installation and set-up Making and answering calls Connect the base unit to the telephone line When you make or answer a call, the display shows the Switch off power at the mains socket Use the plug to call’s duration in minutes and seconds. -
Page 9: Last Number Redial
The handset rings with a special tone. The To mute the To put a call on hold, so that the person on the handset number flashes on the display. If you mouthpiece other end cannot hear you: have more than one handset, they will all ring. -
Page 10: Memory Dialling
There’s a memory dialling list at the end of this Guide. display goes back to standby mode. That memory location is now free. Turn over for details of how to make a call to a stored number. Binatone Help Line: 01325 304 473 E:\Binatone2003\S_2300\s2300_UK_draft02.vp... -
Page 11: Caller Display
If you subscribe to this feature from your service provider, you can see the phone numbers of people calling you, before you answer. The S2300 will store the numbers of the last 20 calls so that you can call them back later. Each Caller Display To store a... -
Page 12: Using The Base Unit's Speakerphone
Speakerphone calls using the base unit are ‘one way at a time’ — while the other person is talking, s/he The call is put on hold and the IN USE/CHARGE can’t hear you. So try not to interrupt each other. -
Page 13: Answering Machine Buttons And Lights
Default screen Answering machine buttons and Setting up the answering machine lights Note — if you pause too long between the steps listed below, the machine will time out and you will DELETE button MEMO/Fast Forward need to start again. -
Page 14: Outgoing Messages (Ogms)
Record your OGM into the base unit’s the beep” . microphone ■ OGM2 — this simply asks callers to try later and does As soon as you have finished speaking, press not give them the opportunity to leave a message. the ON–OFF/STOP button to stop recording The default is “Please call later”... -
Page 15: Using The Answering Machine
PLAY/PAUSE button again to play memo and 2 minutes long) directly into the machine. all your messages It will be played back with any messages from callers. Repeat/Rewind Press and hold the MEMO (FAST FORWARD) button until you hear a ‘beep’... -
Page 16: To Intercept A Call
Using the answering machine Using the answering machine Volume control To go back to If you no longer want callers to hear the OGMs the default you have recorded, you can delete them and To adjust the volume of the loudspeaker during... -
Page 17: Remote Operation
When you hear a ‘beep’, key in your remote security Switch the machine off code u You hear two ‘beeps’ and the machine gives you a list of what keys you can press for diferent functions. Switching on If the answering machine is switched off, it will answer remotely your call after 15 rings. -
Page 18: Tones And Volumes
While the handset is idle (not busy on a call): Each handset has its own number — 1, 2, 3, 4 or 5 — Press the VOLUME button and hold it for which is shown on the left-hand side of the display. -
Page 19: To Make An Intercom Call
The symbol flashes on the display to show that the outside call is on hold. When the other user answers, you can talk to him/her. Press the PHONE button to hang up and... -
Page 20: Conference Calls
If you have a S2300 Twin, Triple, Quad or or Quin with another handset: system, all handsets are already registered to your base unit — the first as handset 1, the second as 2, Either make or answer an outside call etc. You won’t need to re-register them unless you Press the INTERCOM button and key in the have a problem. -
Page 21: (De-Register) All Handsets
Disconnect the mains power lead from the base unit and wait for a few moments ALWAYS ◆ you have followed the steps listed on pages 6 to 8 to Reconnect the mains power lead check first install and set up your S2300... - Page 22 This is caused by interference. Disconnect the mains appear on the it’s not too near to any other electrical equipment. the PHONE or power lead from the back of the base unit, then wait for display, but I SPEAKERPHONE 30 seconds before reconnecting it.
- Page 23 Check that you are using a suitable tone-dialling batteries are on the base unit or charger pod for up to 15 hours to phone. Some cordless or mobile phones do not running low charge the batteries fully. Repeat this.
-
Page 24: Guarantee And Service
In the unlikely event that you need to return your S2300 to our Repair Centre while it is under guarantee, If in doubt, call the Help Line for advice. It will help if there will be a £5 handling charge. -
Page 25: Cleaning And Care
S2300. However, if something does Operating time standby: 80 hours go wrong, please do not try to repair it yourself — talking: 6 hours with speakerphone off consult your supplier or the Binaton Help Line. approx. 1 hour with speakerphone on battery charge time: 15 hours Temperature range Operating 0ºC to 40ºC... - Page 26 Color profile: Generic CMYK printer profile Composite Default screen Index Index problems, 38 telephone line connection, answering a call, 9 electrical power, 6, 42 radio signals, 4 three-way conference, 32 base unit speakerphone, ending a call, 9 recall setting, 40 time setting, 19 extra handsets, 33–34...