Binatone DP270 Instruction Manual page 45

Color profile: Generic CMYK printer profile
Composite Default screen
"The Caller You need to subscribe to the Caller Display feature
from BT or your service provider.
Display feature
isn't working."
The caller may have withheld their number by dialling
141. Or they may be calling from a network that does
not transmit the Caller ID (for example, it may be an
international call).
"I've tried Check your handset's display — if it says either
several times to not sub or base . . . ., you need to re-register the
make a call, but handset, as described on page 34.
I hear Busy tone
If the display says search 1, make sure the mains
and the IN USE
power lead is plugged into the back of the base unit,
light on the
and the adapter is plugged into the mains socket with
base unit does
the power switched on.
not come on."
If you have more than one handset registered to your
base unit, check that another handset isn't already in
use on a call.
Multi-handset use
"I can't transfer Make sure the other handset is within range of the base
a call." unit, and is not busy on a call.
Make sure you are keying in the correct number (1 to
5) for the other handset.
Batteries
"The handset's Before you first used the handset, you should have left it
batteries are on the base unit or charger pod for up to 15 hours to
running low charge the batteries fully.
within an
You may need to replace the batteries (see overleaf).
hour or two."
Binatone Help Line: 01325 304 473
E:\Binatone2003\MD1600\MD1600_03.vp
09 June 2003 15:22:16
Troubleshooting
43