Installation - Binatone DP270 Instruction Manual

Color profile: Generic CMYK printer profile
Composite Default screen

Installation

1
Choose a suitable site for the base
unit
Make sure it is not near to another
telephone, nor to other electrical
equipment.
2 Plug the mains power lead and
the telephone line cord into the
rear of the base unit
Press the cables into the grooves so
that the base unit stands level
3
Plug the mains adapter into a
230 V AC, 50 Hz mains socket,
with the switch on the socket
set to OFF
See the note on page 3
4
Switch on mains power at the socket
5
If you have a MD 1600 Twin, Triple or Quad system ...
Plug the mains power lead into the back
of the charger pod(s)
Plug the mains adapter into a 230 V AC, 50 Hz
mains socket, with the switch on the socket
set to OFF. Then switch on at the socket
DC 9V
4
E:\Binatone2003\MD1600\MD1600_03.vp
09 June 2003 15:22:06
DC 9V
See the note
on page 3