Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
Registering new handsets
If you have a MD 1600 Twin, Triple or Quad system,
!
all the handsets supplied with your base unit are
already registered to it — the first one as handset
number 1, the second as number 2, etc. You won't
need to re-register them unless you have a problem.
If you've bought extra handsets separately, you'll need
to register each one to your original base unit.
1
Press and hold the handset locator button on
To register
a handset
the base unit for about 3 seconds, until you
hear two short beeps and the green IN USE
light flashes
You now have 3 minutes in which to register
the handset.
2
Press the MENU button
The display shows register
(If the display does not show register at this
point, press the o button until it does.)
3
Press the OK button
The display shows:
bs 1 2 3 4
4
Key in a base unit number that is not
flashing
The display shows pin
34
E:\Binatone2003\MD1600\MD1600_03.vp
09 June 2003 15:22:14
These are the base
station numbers. Any
number that is
flashing is already in
use for a base station.
Advertisement
Table of Contents
