Set Up Speakers; Speaker Config - Denon AVR-1312 Getting Started

Set up speakers

For optimum surround playback, adjustment of the distance of speakers and
sound level of each channel, using the test tone, are required, depending on the
environment for speakers to be used.
The settings for the following 5 items should be made:
Speaker Confi g.
Bass Setting
Distance
Channel Level
Crossover Freq.
Menu operation
1 Press .
MENU
The menu is displayed on the TV screen of
this unit.
MENU
Speaker Setup

Speaker Config.

Input Setup Bass Setting
Option Setup Distance
Channel Level
Crossover Freq.
[ENTER] Enter [ ] Return
SVENSKA NEDERLANDS
Select speaker confi guration and size (bass
reproduction capability).
Set subwoofer and LFE signal range playback.
Set distance from listening position to speakers.
Measure beforehand the distance from the
listening position to each speaker.
Set the volume of the test tone to be the same
when it is output from each speaker.
Set the maximum frequency of the bass signal
output from each channel to the subwoofer.
Set the Crossover Frequency to suit the bass
reproduction capability of the speaker being used.
2 Press .
ENTER
Use ui to select the menu to be set
3
or operated, and then press
ENTER
Use o p to select a detailed setting,
4
and then press ENTER .
RETURN
• To return to the previous item, press
B
.
MENU
• Exiting the Menu, press while the menu
is displayed.
The menu display disappears.
ESPAÑOL PORTUGUÊS
Speaker Confi g.
1 Press MENU .
The menu is displayed on the TV screen of
this unit.
MENU
Speaker Setup Speaker Config.
Input Setup Bass Setting
Option Setup Distance
Channel Level
Crossover Freq.
2 Use ui to select "Speaker Setup",
and then press .
ENTER
Speaker Setup
Speaker Config. Front
Bass Setting Center
Distance Surround
Channel Level Surround Back
Crossover Freq. Subwoofer
3 Use ui to select "Speaker Confi g.",
and then press .
ENTER
Speaker Config.
1
Front Large
Center Small
Surround Small
Surround Back None
Subwoofer Yes
NOTE
Do not use the outward shape of the speaker
to determine selection of a "Large" or "Small"
.
speaker. Instead, use the frequencies set in
"Crossover Freq." (vpage 8) as the standard
for determining bass reproduction capability.
4 Use ui to select a speaker, and use
o p to select a detailed setting.
Items to be set are shown below.
ESPAÑOL FRANÇAIS ENGLISH
Default settings are underlined.
Front Set the front speaker size.
• Large : Use a large speaker that can adequately
play back low frequencies.
• Small : Use a small speaker that has inadequate
playback capacity for low frequencies.
• When "Subwoofer" is set to "No", "Front" is
automatically set to "Large".
• When "Front" is set to "Small", "Center",
"Surround" and "Surround Back" can not be
set to "Large".
Center Set the presence and size of the
center speaker.
• Large : Use a large speaker that can adequately
play back low frequencies.
• Small : Use a small speaker that has inadequate
playback capacity for low frequencies.
• None : Select when a center speaker is not
connected.
"Large" is not displayed when "Front" is set
to "Small".
Surround Set the presence and size of the
surround speakers.
• Large : Use a large speaker that can adequately
play back low frequencies.
• Small : Use a small speaker that has inadequate
playback capacity for low frequencies.
• None : Select when the surround speakers are
not connected.
• When "Surround" is set to "Large", "Surround
Back" can be set to "Large".
• When "Surround" is set to "None", "Surround
Back" can automatically set to "None".
vSee overleaf
5