Before Setting Up The Speakers - Denon AVR-1312 Getting Started

ENGLISH FRANÇAIS

Before setting up the speakers

1
Connect this unit to the television using an HDMI cable
(sold separately)
When a device supporting Deep Color signal transfer is connected, use a cable compatible
"High Speed HDMI cable" or "High Speed HDMI cable with Ethernet".
2
Turn the television and subwoofer power on, and
switch the video input to this unit (HDMI input)
For details on how to operate the television and subwoofer , see the television and subwoofer
instruction manual.
q Power on
w Power on
e Switch the input to this unit (HDMI input)
4 4
ESPAÑOL PORTUGUÊS ESPAÑOL NEDERLANDS SVENSKA
3
Insert the main unit power plug into the wall socket
To household power outlet
(AC 120 V, 60 Hz)
4
Insert the provided batteries into the remote control unit
q Remove the rear lid in the direction of the
arrow and remove it.
e Put the rear cover back on.
5
Turn on power to the unit
The power indicator fl ashes green and the power turns on.
Z
Press ( )
ON
Power cord
w Load the two batteries properly as indicated by
the marks in the battery compartment.
R03/AAA
You can also switch the power to standby by
ON/STANDBY
pressing on the main unit.