Crossover Frequency; Playing A Blu-Ray Disc Player - Denon AVR-1312 Getting Started

ENGLISH ENGLISH FRANÇAIS DEUTSCH
Crossover Freq.
1 Use ui to select "Crossover Freq.",
and then press .
ENTER
Speaker Setup
Speaker Config. Front
Bass Setting Center
Distance Surround
Channel Level Surround Back
Crossover Freq.
[ENTER] Enter [ ] Return
Crossover Freq.
1
Front Full Band
Center 80Hz
Surround 80Hz
Surround Back None
2 Use ui to select a speaker, and use
o p
to select the frequency.
Front / Center / Surround / Surround Back
Specify crossover frequency for
speaker.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz /
120Hz / 150Hz / 200Hz / 250Hz : Set the

crossover frequency.

8 8
FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO
Default settings are underlined.
• "Crossover Freq." can be set when the "Bass
Setting" – "SW Mode" (vpage 6) setting
is "LFE+Main", or when you have a speaker
that is set to "Small".
• Always set the crossover frequency to "80Hz".
When using small speakers, however, we
recommend setting the crossover frequency to
a higher frequency.
• For speakers set to "Small", sound below the
crossover frequency is cut from the sound
output. The cut bass sound is output from the
subwoofer or front speakers.
• The "SW Mode" setting
determines which speakers can be set.
• When "LPF for LFE" is selected, speakers set
to "Small" at "Speaker Confi g." can be set. If
the speakers are set to "Large", "Full Band"
is displayed and the setting cannot be made.
• If set to "LFE+Main", this setting can be made
regardless of the speaker size.
3 Press to enter the setting.
ENTER
Speaker Setup
each Speaker Config. Front
Bass Setting Center
Distance Surround
Channel Level Surround Back
Crossover Freq.
4 Press .
MENU
The menu display disappears.
ESPAÑOL ESPAÑOL NEDERLANDS NEDERLANDS SVENSKA SVENSKA

Playing a Blu-ray Disc player

This section explains the basic operations for surround playback using a Blu-ray
Disc player connected to this unit.
For details, see the included CD-ROM (Owner's manual).
Press to switch an input source for a player used for
BD
1
playback.
Play the component connected to this unit.
2
Make the necessary settings on the player (language setting, subtitles
setting, etc.) beforehand.
Adjust the sound volume.
3
M
d/f ···························· Volume up /down
N
·····················································Muting
(vpage 6)
SURROUND 0
4 Press
mode.
The listening mode is displayed on the display or TV screen.
SURROUND 0
• Each time
switched. Select the desired listening mode.
When power is switched to standby
X
STANDBY
Press ( ).
n Power indicator status in standby mode
• Normal standby : Off
NOTE
During power standby, a minimal amount of power is
consumed. To totally cut off the power, remove the
power cord from the power outlet.
See the following items on the included CD-ROM (Owner's manual).
n Playing a Blu-ray Disc player/DVD player
n Playing a portable player
n Playing an iPod ®
SURROUND 1
or to select a listening
SURROUND 1
or is pressed, the listening mode is
GConnecting a Blu-ray Disc playerH
Blu-ray Disc player
Other operations
n Tuning in radio stations
n Convenient functions
n How to make detailed settings
HDMI
cable
(sold separately)