GE AZ61H12DAB Owner's Manual And Installation Instructions page 21

GEAppliances.com
Problem Possible Causes What To Do
The air is not always The heat pump is not • This is normal. The heat pump will produce warm air
cool or hot during producing hot air. but not as hot as air produced when the higher-cost
operation electric heat is used.
The air does not feel
worm enough during
heating operation
The unit is not
blowing out air
The electric heating
feature does not work
Temperature display
flashes
The Smart Fen Auxilierg
Controls mag be set to
continuous fen.
This causes the fan to blow room temperature air
even when the compressor or heater cgcles off.
The continuous air movement provides better
overall temperature control in the cool mode.
See Smart Fan - Cooling/Heating on page 5.
The heat pump alone
produces air that feels
cooler than desired.
Use the Electric Heat Option. This turns off the
heat pump and warms with electric heat onlg.
NOTE: Use of this option will result in increased energbl
consumption.
The Smart Fan Au×iliarg • See Smart Fan - Cooling/Heating on page 5.
Controls mag be set to cgcle.
The power cord is not
firmlg attached.
• Remove the room cabinet and make sure that the
gellow connector on the end of the power cord is
firmlg engaged.
The compressor mag
have failed.
• Set the operation control to STOPand then restart
the unit. If the flashing light reappears within
30 minutes, call for service.
21