Configuring Your Camera
Total Actuations
You can determine the number of images
captured by the DCS Pro Back Plus from the time
of its manufacture.
1
Display the Properties menu
2
Select Total Actuations.
The total number of images captured appears.
Contents
Back
(page
50).
Next
Index
Use Folder01
You can change the default folder used when a
CF Card is inserted
(page
If you do not change the default folder, the default
is the lowest numbered empty folder.
Display the Properties menu
1
Select Use FOLDER01.
2
Choose Yes or No.
3
If you choose Yes, FOLDER01 will be active
when you insert a CF Card.
If you choose No, the lowest numbered empty
folder will be active when you insert a CF
Card.
43).
(page
50).
52