The Basics
Accessing Images on a CF Card
After you capture images to a CF Card, you need
to copy them to a computer with Capture Studio
software.
1
Eject the CF Card
(page 44)
Back Plus.
If your computer has a CF Card reader, insert
2
the CF Card in the reader. If your computer
uses a PC Card reader, first insert the CF
Card into a PC Card adapter.
If the DCS Capture Studio or DCS Photo Desk
3
software is installed on your computer, you
can access the images directly from the CF
Card or copy them from the card to a folder on
the computer's hard drive. Otherwise, copy
the image files to a server which can be
accessed by a computer that has DCS
Capture Studio or DCS Photo Desk software
installed.
Contents
Back
from the DCS Pro
Next
Index
46