Vista; Functions; Untied Overclocking Technology; Raid Functions - ASROCK ALIVEN570SLI-ESATA2 User Manual

2.16.2 2.16.2 2.16.2 Installing Windows Installing Windows Installing Windows
2.16.2 2.16.2 Installing Windows Installing Windows
RAID F RAID F

RAID Functions

RAID F RAID F unctions unctions unctions unctions
If you want to install Windows
SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
®
STEP 3: Install Windows
system.
Insert the Windows

Vista

® TM
to boot your system, and follow the instruction to install Windows
Vista 64-bit OS on your system. When you see "Where do you want to install Windows?
TM
" page, please insert the ASRock Support CD into your optical drive, and click the "Load
Driver" button on the left on the bottom to load the NVIDIA
drivers are in the following path in our Support CD:
.. \ I386 (For Windows Vista
®
.. \ AMD64 (For Windows
®
After that, please insert Windows
the optical drive again to continue the installation.
NOTE. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
2 . 1 7 2 . 1 7 2 . 1 7 Untied Overclocking T Untied Overclocking T

Untied Overclocking Technology

Untied Overclocking T
2 . 1 7 2 . 1 7 Untied Overclocking T
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS
setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is
untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can
operate under a more stable overclocking environment.
Please refer to the warning on page 8 for the possible overclocking risk
before you apply Untied Overclocking Technology.
Vista Vista Vista / Vista / Vista / Vista
Vista Vista / Vista / Vista
TM TM TM TM TM
®
Vista or Windows
® TM ®
Advanced screen
TM ® TM
Vista / Windows Vista
/ Windows Vista 64-bit optical disk into the optical drive
® TM
OS)
TM
Vista 64-bit OS)
TM
Vista / Windows
® TM ®
Vista / Windows Vista
® TM ® TM
echnology echnology echnology
echnology
3 9 3 9 3 9 3 9 3 9
64-bit With 64-bit With 64-bit With
64-bit With 64-bit With
TM TM TM TM TM
Vista 64-bit on your SATA /
TM
IDE Configuration.
64-bit OS on your
Vista / Windows
® TM
RAID drivers. NVIDIA RAID
® ®
Vista 64-bit optical disk into
TM
64-bit on IDE HDDs and want to
®