ASROCK ALIVEN570SLI-ESATA2 User Manual page 26

System Panel Header
(9-pin PANEL1)
(see p.11, No. 21)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.11, No. 22)
Chassis Fan Connector
(3-pin CHA_FAN1)
(see p.11, No. 11)
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.11, No. 2)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
ATX Power Connector
(24-pin ATXPWR1)
(see p.11, No. 4)
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your power
supply along with Pin 1 and Pin 13.
This header accommodates
PLED+
PLED-
PWRBTN# several system front panel
GND
functions.
1
DUMMY
RESET#
GND
HDLED-
HDLED+
Please connect the chassis
1
speaker to this header.
SPEAKER
DUMMY
DUMMY
+5V
Please connect a chassis fan
cable to this connector and
CHA_FAN_SPEED
+12V
match the black wire to the
GND
ground pin.
Please connect the CPU fan
1
GND
cable to this connector and
2
+12V
3 CPU_FAN_SPEED
match the black wire to the
4 FAN_SPEED_CONTROL
ground pin.
Pin 1-3 Connected
1 Please connect an ATX power
13
supply to this connector.
12
24
20-Pin ATX Power Supply Installation
2 6 2 6 2 6 2 6 2 6
3-Pin Fan Installation
13
24
1
12