ASROCK ALIVEN570SLI-ESATA2 User Manual page 24

eSATAII Connector
(eSATAII_TOP: see p.11, No. 37)
Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Headers
(9-pin USB6_7)
(see p.11 No. 19)
(9-pin USB4_5)
(see p.11 No. 20)
WiFi/E Header
(15-pin WIFI/E)
(see p.11 No. 26)
This eSATAII connector
supports SATA data cable for
external SATAII function. The
current eSATAII interface
allows up to 3.0 Gb/s data
transfer rate.
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on this motherboard.
You can also use the SATA data
cable to connect SATAII_6
(PORT 3.1) connector and eSATAII
connector.
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connect to the
power supply connector of the power supply.
Besides four default USB 2.0
ports on the I/O panel, there are
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
This header supports WiFi+AP
function with ASRock
USB+5V_2
TXN
TXP
WiFi-802.11g or WiFi-802.11n
GND2
PCIE_RST#
+3SVB
module, an easy-to-use wireless
RXN RXP
local area network (WLAN)
1
PexCLK
GND1
adapter. It allows you to create a
PexCLK#
D0- D0+
PME#
USB+5V_1
wireless environment and enjoy the
convenience of wireless network
connectivity.
2 4 2 4 2 4 2 4 2 4