Ide Configuration - ASROCK 4CORE1333-VIIV - V1.0 User Manual

ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
3.3.4

3.3.4 IDE Configuration

3.3.4 IDE Configuration IDE Configuration IDE Configuration
3.3.4 3.3.4 IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
[Enhanced]
SATAII Configuration
Configure SATAII as [AHCI]
OnBoard SATAII Controller [Enhanced]
SATAII 1 [Hard Disk]
SATAII 2 [Not Detected]
SATAII 3 [Not Detected]
SATAII 4 [Not Detected]
SATAII 5 [Not Detected]
SATAII 6 [Not Detected]
IDE1 Master [Not Detected]
IDE1 Slave [Not Detected]
AHCI CD/DVD Boot Time out [20]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
SATAII Configuration
Please select [Compatible] when you install legacy OS (Windows NT). If
native OS (Windows 2000 / XP) is installed, please select [Enhanced].
Then in the option "Configure SATAII as", you are allowed to set the selec-
tion from [AHCI] to [RAID] if you plan to enable RAID function. Configuration
options: [AHCI], [IDE], and [RAID]. The default value is [AHCI].
1. AHCI (Advanced Host Controller Interface) supports Hot
Plug, NCQ and other new features that will improve SATA
disk performance but IDE mode does not have these
advantages.
2. Only AHCI and RAID modes support Hot Plug function.
OnBoard SATAII Controller
Use this item to enable or disable the "OnBoard SATAII Controller" feature.
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the "IDE Master" as the example in the following instruction, which can
be applied to the configurations of "IDE Slave" as well.
Vista certification.
® TM
Options
Disabled
Compatible
Enhanced
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC Exit
ESC Exit
5 9 5 9 5 9
5 9 5 9