Ide Configuration - ASROCK P45R2000-WiFi User Manual

Ring-In Power On
Use this item to enable or disable Ring-In signals to turn on the system from
the power-soft-off mode.
PCI Devices Power On
Use this item to enable or disable PCI devices to turn on the system from the
power-soft-off mode.
PS/2 Keyboard Power On
Use this item to enable or disable PS/2 keyboard to turn on the system from
the power-soft-off mode.
RTC Alarm Power On
Use this item to enable or disable RTC (Real Time Clock) to power on the
system.
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
3 . 3 . 4

3 . 3 . 4 IDE Configuration

3 . 3 . 4 IDE Configuration IDE Configuration IDE Configuration
3 . 3 . 4 3 . 3 . 4 IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
[Enhanced]
SATAII Configuration
Configure SATAII as
Hot Plug
OnBoard IDE Controller [Enabled]
SATAII 1
SATAII 2
SATAII 3
SATAII 4
SATAII 5
SATAII 6
IDE1 Master
IDE1 Slave
AHCI CD/DVD Boot Time out [35]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
SATAII Configuration
Please select [Compatible] when you install legacy OS. If native OS (Windows
2000 / XP) is installed, please select [Enhanced]. Then in the option "Config-
ure SATAII as", you are allowed to set the selection to [RAID] if you plan to
enable RAID function. Configuration options: [AHCI], [IDE] and [RAID]. The
default value is [AHCI].
If you select [AHCI] or [RAID] mode, the option "Hot Plug" will appear. You are
allowed to use the Hot Plug function under Windows environment if this option
is enabled. Configuration options: [Enabled] and [Disabled].
* RAID option is only supported for P45R2000-WiFi / P45R2000.
® Vista TM certification.
Options
Disabled
Compatible
[AHCI]
Enhanced
[Enabled]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen Select Screen
[Not Detected]
Select Item Select Item
[Not Detected]
+- +- Change Option Change Option
[Not Detected]
F1 F1 General Help General Help
[Not Detected]
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
6 4 6 4 6 4
6 4 6 4