Table of Contents
Advertisement
For Windows
Click the right-top "Folder" icon
panel jack detection", and save the change by clicking "OK".
System Panel Header
(9-pin PANEL1)
(see p.11 No. 20)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.11 No. 24)
Chassis Fan Connector
(3-pin CHA_FAN1)
(see p.11 No. 18)
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.11 No. 7)
FAN_SPEED_CONTROL
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
ATX Power Connector
(20-pin ATXPWR1)
(see p.11 No. 3)
ATX 12V Connector
(4-pin ATX12V1)
(see p.11 No. 2)
Vista
/ Vista
64-bit OS:
®
TM
TM
, choose "Disable front
This header accommodates
PLED+
PLED-
PWRBTN#
several system front panel
GND
functions.
1
DUMMY
RESET#
GND
HDLED-
HDLED+
Please connect the chassis
1
speaker to this header.
SPEAKER
DUMMY
DUMMY
+5V
Please connect a chassis fan
cable to this connector and
GND
match the black wire to the
+12V
CHA_FAN_SPEED
ground pin.
Please connect a CPU fan cable
4 3 2 1
to this connector and match
GND
the black wire to the ground pin.
+12V
CPU_FAN_SPEED
Pin 1-3 Connected
3-Pin Fan Installation
Please connect an ATX power
supply to this connector.
Please connect an ATX 12V
power supply to this connector.
3 4
3 4
3 4
3 4
3 4
Advertisement
Table of Contents
