Expansion Slots - ASROCK 4CORE1333-VIIV - V1.0 User Manual

2.6 Expansion Slots (PCI, PCI Express, and AGI Express 2.6 Expansion Slots (PCI, PCI Express, and AGI Express 2.6 Expansion Slots (PCI, PCI Express, and AGI Express
2.6 Expansion Slots (PCI, PCI Express, and AGI Express 2.6 Expansion Slots (PCI, PCI Express, and AGI Express
Slots) Slots) Slots) Slots) Slots)
There are 3 PCI slots, 2 PCI Express slots, and 1 AGI Express slot (PCI Express x4)
on this motherboard.
PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
PCIE slots: PCIE1 (PCIE x1 slot) is used for PCI Express cards with x1 lane width
cards, such as Gigabit LAN card, SATA2 card and ASRock PCIE_DE
card (optional).
PCIE2 (PCIE x16 slot) is used for PCI Express cards with x16 lane
width graphics cards.
AGI Express slot (PCI Express x4):
AGI Express slot (PCI Express x4) is used to install PCI Express
expansion cards. You need to adjust the jumpers in advance to enable
AGI Express slot (PCI Express x4), but under this situation, onboard IDE
connector (IDE1) will be disabled. Please refer to below table for proper
jumper settings.
If you plan to install only one PCI Express card on this motherboard, please
install it on PCIE2 (PCIE x16 slot).
Function
Enable AGI Express slot (PCIE x4)
/ Disable onboard IDE connector (IDE1)
Enable onboard IDE connector (IDE1)
/ Disable AGI Express slot (PCIE x4)
(Default)
Jumper Settings
2 0 2 0 2 0
2 0 2 0