Removing/installing the oven door Control panel overview Oven light Accessories Removing the shelf railings Shelf positions Heating element Before Using Your Appliance for the Service and Repair Information First Time Trouble-shooting Guide 29+30 Setting the time of day Preliminary cleaning...
They contain important information again. concerning your personal safety as well Before you dispose of your old as on use and care of the appliance. appliance, make sure that it has been The Instructions for Use apply to several rendered inoperable.
Always Do not insert a baking sheet at the keep children away from the appliance. bottom of the oven, or cover the base of the oven with aluminium foil, as this Never leave the appliance unattended would result in heat build up.
Page 5
Temperature selector with oven temperature display The control panel: The switches are retractable. To engage and disengage, depress the switch, making sure that it is in OFF position. Oven functions: Note: Circotherm and defrosting position The oven light switches on for every Conventional oven function.
Introducing: Your new Cooker Accessories Your appliance is supplied with: 1 Wire shelves 1 Roasting/grill pan Order no. The following accessories can be obtained from the supplier of your oven: Deep roasting pan Z 1270 X2 Baking tray, aluminium Z 1330 X0...
Before Using Your Appliance for the First Time Time of day Before you use your appliance for the first time, it is necessary to set the current time on the electronic timer. After connecting to the mains, or after a power failure, the display will blink.
(e.g. minutes). Å When the timer switches on, the remaining time is displayed. 2. A signal tone is emitted when the time has elapsed and the indicator flashes. > To stop the signal tone, press the button.
Electronic timer Automatic timer You can switch the oven on and off via the electronic clock. Setting the length of cooking time: Automatic switch off: If you wish to bake or roast food immediately, it is only necessary to set the cooking time.
Page 10
Electronic timer Automatic switch on and switch off: Setting the length of cooking time: If the food is to be cooked later on, both the cooking time and Off time must be set. 1. Select the heating system and the oven temperature.
7 seconds. automatically dimmed. The display then goes blank and the time continues running in the background. 2. To switch on the display, briefly press > button. Note: The automatic timer is best used with dishes which require little attention.
Radiant grill —————————— Advantages: The food being cooked is exposed to heat – low soiling of oven interior from the grill element at the top of the oven cavity. – cooking on up to 3 shelf levels at once is possible Advantages: –...
Page 13
The dough proving function provides ideal The hydroclean system featured in your conditions inside the oven for getting yeast oven is intended to help you keep your dough to rise. oven neat and tidy. An amount of cleaning solution is vaporised automatically. The Temperature: 35 –...
< on the Button is extinguished. 50 – 275 Switching off the oven: To switch off, turn the function selector to 50 – 275 the 0-Position. All functions are cancelled. 50 – 275 Note: 50 – 250...
Å – – is displayed. The oven cannot be unintentionally switched on, e.g. by children. To release the oven switch 3 x from the position to the oven light . Oven Å light – – goes out.
Always place baking tins in the centre of the wire shelf. Circotherm: You can use baking tins of any material and of any colour, as long as they are oven-proof. Do not place baking tins or high cakes too close to the rear oven wall.
150 grams (5 oz) or more. Place the shelf on top of the roasting Baste the meat if desired. pan. Place in a cold oven to save energy or Place the meat on the shelf, season if pre-heat if desired. desired.
Use the shelf and roasting pan together. Season meat as required. Place on shelf. Do not turn food over – the hot air will circulate around the food cooking all sides. Use a temperature of 180–190 °C.
Cooking Tips and Helpful Hints When cooking with Circotherm: Cakes baked in a tin get too dark at the Avoid blocking the air vents at the rear wall back. of the oven with the cake tins. Cakes remain doughy and collapse Reduce the temperature for deep cakes.
Defrost frozen meals packed in If frozen meat is placed in the oven, the aluminium foil or closed aluminium defrosting time must be added to the containers at a setting of 130 – 140° C.
Page 21
Depending on size and type of bakeware, defrost for 25 – 45 minutes. After this time, remove the food from the oven. Let it stand at room temperature for 30 – 40 minutes. With smaller amounts (pastries) the Function selector Temperature selector defrosting time is reduced to 15 –...
Please read the enclosed cookery book for suggestions on how to make subsequent use of the dough. Before you start baking, remove the water left inside the oven. If any traces of lime are left behind, they can be dissolved with a little vinegar and wiped off using clear water.
Important cleaning basics: For cleaning, do not use abrasives, corrosive cleaners, aerosol cleaners or sharp objects. Do not scratch off burnt-on food residues, but soak off them with a damp cloth and washing up liquid. Oven cleaners must not be used on aluminium or plastic parts.
Hydroclean system: Switching OFF: The hydroclean system featured in your Turn the function selector to the 0 position. oven is intended to help you keep your oven The oven cleaning control lamp neat and tidy. An amount of cleaning extinguishes.
Page 25
Cleaning tips: Never leave the residual water in the oven for any length of time, e.g. overnight. 1. Open the oven door and pick up the remaining water with a large absorbent sponge cloth. 2. Using the detergent-soaked sponge cloth, a soft brush or a nylon scrubber, wipe off the oven interior.
Unhook oven door: Backofentür aushängen: 1. Push the lock bolt to the left and right, 2. Hold the oven door at the top and at the inwards and open the oven door until it same time slightly lift the handle.
Turn the function selector one setting to the left. The symbol illuminates. Removing the shelf railings: 1. On both left and right sides, remove the one milled screws. 2. Carefully remove the suspended grids. Lowering the heating element: Caution: The heating element must have been allowed to cool.
Service and Repair Information In the event of problems or repairs that you cannot solve yourself, our customer service will be happy to help. Check the customer service directory for an office facility in your area. Caution: Calling the customer service...
Important general safety guidelines: Service or repair work on the electronic components may only be performed by a qualified expert. Without exception, prior to starting such repairs, the appliance must be disconnected from the mains. This may be accomplished by tripping the automatic fuse or by removing the fuse from the fuse box that controls your home.
Troubleshooting Problem Possible cause Remedy ... if the oven door cannot be unhin- Slanting position not kept or handle Check slanting position and handle ged? lifted too much. position..if the oven door cannot be hung Cross bar under the oven is pushed Push the cross bar to the rear notch forwards.
WARNING: Connection and first start of the appliance may only be performed by an authorised specialist. Connection must be made using an H 0 5 V V- F mains connection cable. Nominal connected loading, nominal voltage and model number of the appliance:...
Assembly Instructions Installation of the built-in oven Push the built-in oven into the housing unit and align the unit until it is in a level position. Open the oven door and, using one screw on each side, fasten the built-in oven to the side strips of the housing mind.