Omron ZFX-C10 - COMMUNICATION Command Reference Manual page 30

Backing up System Data < SYSSAVE command >
Backing up system data to an external device from the Controller
This command backs up the system data from the Controller by XMODEM protocol.
No parameters are provided for this command.
< Command format >
S Y S S A V E
< File transfer >
The system data is transferred by XMODEM (-CRC or SUM) after READY is received. XMODEM (-1K) is not
supported.
< Response format >
C R
R E A D Y
When processing ends successfully
C R
O K
When processing fails
E R C R
Backing up system data to an SD card from the Controller
This command backs up system data to an SD card from the Controller.
< Command format >
S Y S S A V E
< Response format >
When processing ends successfully
C R
O K
When processing fails
C R
E R
< Explanation of parameters >
File name
28
About Communication Commands
or
0 C R
1 C R
File name
The file can be given any name within eight alphanumeric characters. (An extension is not
required.)
S S 0 C R
or
S S 1
ZFX-C Serial Communication Command Reference
C R
File name