Omron ZFX-C10 - COMMUNICATION Command Reference Manual page 29

Uploading System Data < SYSLOAD command >
Uploading system data to the Controller from an external device
This command uploads the system data to the Controller by XMODEM protocol.
No parameters are provided for this command.
< Command format >
S Y S L O A D 0 C R
< File transfer >
The system data is transferred by XMODEM (-CRC or SUM) after READY is received. XMODEM (-1K) is not
supported.
< Response format >
C R
R E A D Y
When processing ends successfully
C R
O K
When processing fails
E R C R
Uploading system data to the Controller from an SD card
This command uploads system data to the Controller from an SD card.
< Command format >
S Y S L O A D 1
< Response format >
When processing ends successfully
C R
O K
When processing fails
E R C R
< Explanation of parameters >
File name Specifies the file name within eight alphanumeric characters. (An extension is not
required.)
ZFX-C Serial Communication Command Reference
or
S L 0 C R
or
C R
S L
File name
1 C R
File name
About Communication Commands
27