Omron ZFX-C10 - COMMUNICATION Command Reference Manual page 27

Backing up Image Data < IMGSAVE command >
Backing up image data from the Controller to an external device
This command backs up image data from the Controller by XMODEM protocol.
< Command format >
I M G S A V E 0
< File transfer >
The image data is transferred by XMODEM (-CRC or SUM) after READY is received. XMODEM (-1K) is not
supported.
< Response format >
R E A D Y C R
When processing ends successfully
O K C R
When processing fails
C R
E R
< Explanation of parameters >
Save memory No. Specifies the No. of the save memory for backing up the image data to. (0 to 99)
When "-1" is specified for the Save memory No., the latest image data of camera 0 is
specified.
ZFX-C Serial Communication Command Reference
or
C R I S
Save
memory No.
(max. 2 digits)
0 C R
Save
memory No.
(max. 2 digits)
About Communication Commands
25