Item Overview (Width) - Omron ZFX - SHORT MANUAL V1.0 Manual

4-8 ITEM Overview (Width)

4-8 ITEM Overview (Width)
Setup
Start
point
This item detects two edges, based on the change of brightness. Use this
item to measure the distance between two edges of a measurement target.
Measurement region
End
point
Edge 1
(start point side)
Another setting
Measurement mode Average (default) / Maximum / minimum
Set the definition of the distance.
Start point
Color mode Filter mode (default) / Pickup mode
This is same setting as position. (See the "Position")
Split size 1 to 99 (default value: 1)
This is same setting as position. (See the "Position")
Color 1, 2 Light --> Dark (default) / Dark --> Light
This is same setting as position. (See the "Position")
Edge level 1, 2 0 to 100 (%) (default value: 50)
This is same setting as position. (See the "Position")
Noise level 1, 2 0 to 255 (default value: 20)
This is same setting as position. (See the "Position")
Noise width 1, 2 0 to 255 (default value: 0)
This is same setting as position. (See the "Position")
Measurement
Dimension
Edge 1 is searched from start point towards the end point.
Edge 2 is searched from end point towards the start point.
Width when [Maximum] is selected
Width when [Minimum] is selected
Item Overview
Edge 2
(end point side)
Split size
End point
51