Table of Contents
Advertisement
2-5 Getting the clear image
Automatically Picking up Colors
MENU mode
- [Setup] icon
- [Item] icon
- [Img Adj] icon
- [Select Camera] menu (only C20/25)
- [Color Filter] menu
- [Region] menu
1.
Draw the region and Click [Apply]
Important
This region isn't the measurement region.
This region is drown around the part that the
desired colore are in.
2.
Select [Pickup]
3.
Select [Auto]
Candidates for up to 4 colors are select-
ed.
4.
Check if the desired colors are picked up.
Select the icon of a candidate color. Only
an image of thecorresponding color is
displayed.
5.
If you don't use some colors as the color
of measurement target, select [Disable].
[Enable/Disable][-Disable]
Main Operation
27
Advertisement
Table of Contents
