Parameter Monitor Screen Display - Omron ZEN Operation Manual

Using Timers (T) and Holding Timers (#)
Timer Types
Time Units and Settings
Monitor Enabled or Disabled
3-6-3

Parameter Monitor Screen Display

All Timers Except Twin Timers
Trigger input status
( : OFF/●: ON)
Reset input status
( : OFF/●: ON)
Twin Timers
Trigger input status
( : OFF/● : ON)
X ON delay
■
OFF delay
O One-shot pulse
F Flashing pulse
W Twin
S 00.01 to 99.99 s (in 0.01-s units)
M:S 00 min 01 s to 99 min 59 s (in minutes and seconds)
H:M 00 h 01 m to 99 h 59 m (in hours and minutes)
A Operating parameters can be monitored and settings changed.
D Operating parameters cannot be monitored nor settings changed.
RUN
TO
ON-TIMER
TRGo
RESo
Reset input status
( : OFF/●: ON)
TO
OFF-TIMER
TRGo
RESo
Timer present value
Timer bit status
( : OFF/●: ON)
Timer setting
W M:S A
00.00o
Timer bit status ( : OFF/●: ON)
02.10
ON timer setting
▲ ▼
ON timer present value
to switch the display.
W H:M A
Timer bit status ( : OFF/●: ON)
00.00o
01.13
OFF timer setting
▲ ▼
OFF timer present value
Section 3-6
77