Table of Contents
Advertisement
Online Editing
3
Select Program - Online Edit - Begin. The SFC program becomes editable.
4
Note: Refer to Limitations of Online Editing on page 108 for precautions that apply during online
Transferring the Changes
1
After editing is complete, select Program - Online Edit - Send Changes. The
Send Changes dialog is displayed, as shown below.
2
Select the transfer mode and click OK. The edited SFC program is transferred to
the PLC.
For details on the transfer modes, refer to Transfer Modes and Selecting a Transfer
Mode below.
Begin editing the SFC program or subcharts. The editing operations are
essentially the same as for offline editing.
editing.
Section 5-1
105
Advertisement
Chapters
Table of Contents
