Omron WS02-CXPC1-V8 - V8.1 REV 02-2009 Operation Manual page 85

Editing the SFC Chart
The edit window for the transition program (ladder or ST) will open, allowing you to
create the program.
For details on editing in ladder or ST, refer to the CX-Programmer Operation
Manual (Cat. No. W446).
3 Input the name of the transition program as a transition condition.
Assigning a Transition Program Name to a Transition
A transition program can be set as a transition condition by assigning its name to a
transition.
Transition program names can be changed so that they are more self-explanatory.
1 Right-click the Transitions folder in the project workspace, and select Properties
from the pop-up menu.
The Transition Properties dialog is displayed.
2 Under the General tab, input the transition program name into the Name field.
3 Click the close button to close the Transition Properties dialog.
4 Input the new transition program name as a transition condition.
Section 3-2
69