Omron WS02-CXPC1-V8 - V8.1 REV 02-2009 Operation Manual page 32

Window Components
Insert Step Above
Add Convergence
Add Simultaneous Sequence Divergence
Connections
Add Subchart Step
Open Transition Definition
Cut
Copy
Paste
Delete
Tidy Descendant SFC Elements
Online Pop-Up Menu
Force Step
Open Transition Definition
Tidy Descendant SFC Elements
16
Add Connection
Add Jump From Transition
Add Connection From
Transition
Delete Connection From
Transition
Draw Connections From
Transition as Jump
Add Connection To
Transition
Delete Connection To
Transition
New Subchart
Existing Subchart
Menu
On
Off
Cancel
Adds a step to the topside of the
selected transition
Adds a convergence and a step, and
connects them to the selected
transition.
Adds a simultaneous sequence
divergence and 2 steps, and connects
them to the selected transition.
Opens the Add Connection dialog.
Draws out a connection from the
downside of the selected transition, and
connects it to the topside of the step
that is to become the jump destination.
Draws out a connection from the
downside of the selected transition, and
connects it to the topside of a step.
Deletes the connection on the topside
of the selected transition.
Changes the topside of the selected
transition to a jump.
Draws out a connection from the
topside of the selected isolated
transition, and connects it to the
downside of a step.
Deletes the connection on the
downside of the selected transition.
Creates and adds a new subchart, and
connects it to the selected transition as
a subchart step.
Connects an already registered
subchart to the selected transition as a
subchart step.
Opens the selected transition program.
Cuts the selected transition to the
clipboard.
Copies the selected transition to the
clipboard.
Pastes the contents of the clipboard.
Deletes the selected transition.
Arranges SFC chart elements
positioned after the selected transition.
Sub-Menu
Sets the transition condition to ON.
Sets the transition condition to OFF.
Cancels the forced status.
Displays the selected transition
program.
Arranges SFC chart elements
positioned after the selected transition.
Section 1-3
Function