Solid State Relays - Omron G3ZA Manual

Solid State Relays

G3PA
Extremely Thin Relays Integrated with Heat
Sinks
• Comply with VDE 0160 (finger protection), with a dielectric
strength of 4,000 V between input and load.
• Downsizing achieved through optimum design of heat sink.
• Mounting possible via screws or via DIN track.
• Certified by UL, CSA, EN, and VDE (reinforced insulation).
• Recommended for use with the soft-start function of the G3ZA.
Ordering Information
■ List of Models
Isolation Zero cross function
Phototriac No
coupler
Note: 1. The rated output load depends on the ambient temperature. Refer to Engineering Data.
2. The loss time will increase if 75 VAC or less is used. Check operation using the actual load.
Indicator Rated output load (See note 1.)
Yes 10 A at 24 to 240 VAC (See note 2.) 5 to 24 VDC
20 A at 24 to 240 VAC (See note 2.)
40 A at 24 to 240 VAC (See note 2.)
60 A at 24 to 240 VAC (See note 2.)
Rated input voltage
G3PA-210BL-VD DC5-24
G3PA-220BL-VD DC5-24
G3PA-240BL-VD DC5-24
G3PA-260BL-VD DC5-24
G3PA
Solid State Relays
Model
11