Nomenclature And Operations - Omron G3PW Manual

G3PW

Nomenclature and Operations

Level Indicators
Indicator
■ ADJ
Lit when in the adjustment level.
■ SET
Lit when in the initial setting level.
■ EV
Lit when an external contact reset input or an event input is ON.
Monitoring Indicators
Indicator
■ %(IN)
Lit when the input value is monitored in the monitor level.
■ %(DUTY)
Lit when the duty value is monitored in the monitor level.
■ %(OUT)
Lit when the output value is monitored in the monitor level.
■ %(PHASE)
Lit when the phase angle is monitored in the monitor level.
■ A
Lit when the current is monitored in the monitor level.
Communications Indicator
Indicator
■ COMM
Lit when the serial communications are in progress.
Operation Keys
Key symbol Name
LVL (level) Key
ENT/RST (en-
ter/reset) Key
UP Key
DOWN Key
4
7-segment display
Monitoring indicators
Communications
indicator
Control terminal block
Protective cover
(removable)
Description
Level Changes
Monitor level ↔ Adjustment level
Monitor level ↔ Initial setting level
Software is reset when moving from the initial set-
ting level to monitor level.
Set value display
Set value change and entry
Error reset
Set value change
Monitor item/set value number change
Level indicators
Reset/event indicator
LVL Key
UP Key
DOWN Key
ENT/RST Key
Command input and
power supply terminal
block (with cover)
1. 1 to 5-V/0 or 5-V input
2. 4 to 20-mA input
3. Current/voltage input COM
4. 100 to 240 VAC
5. 100 to 240 VAC
Load terminal block
(under protective cover)
100 to 240 VAC
Description
Description
Description
Enabling condition
Changing from monitor level to adjustment level or
from monitor level to initial setting level is possible
even when an error occurs.
In the monitor level, the ENT/RST Key functions as
a Reset Key only when an error occurs. (It does not
function as a Reset Key when there is no error.)
---