Omron E5CK User Manual page 140

CHAPTER 6 USING THE COMMUNICATIONS FUNCTION
Parameter No.
41 Step 14 SP
42 Step 14 time
43 Step 15 SP
44 Step 15 time
04 Pattern execution count
45 Time signal 1 enabled step
46 Time signal 1 ON time
47 Time signal 1 OFF time
48 Time signal 2 enabled step
49 Time signal 2 ON time
50 Time signal 2 OFF time
62 Standby time
54 Operation at power ON
55 End condition
61 Number of patterns
51 Program time unit
56 Step time/Rate of rise programming
57 Time unit of ramp rate
58 PV start
52 Alarm during ramp step enable
53 Run all enable
6–14
Parameter Data Setting and Monitor Range
SP lower limit to SP upper limit
0.00 to 99.59
SP lower limit to SP upper limit
0.00 to 99.59
0 to 9999
0 to 15
0.00 to 99.59
0.00 to 99.59
0 to 15
0.00 to 99.59
0.00 to 99.59
0.00 to 99.59
*3
0: Reset, 1: Final step SP
1 to 4
0: Hour, minute, 1: Minute, second
0: Step time, 1: Rate of rise programming
0: Minute, 1: Hour
0: SP start, 1: PV start
0: OFF, 1: ON
0: OFF, 1: ON
Mode
Program g
Level 2
Expansion p