Protect Switch - Omron E5CSV Manual

(2) Using the E5CSV in Devices for Fahrenheit-scale Users
(Displaying in ° F)
Turn ON switch 6 to display temperatures in ° F.
ON
1 2
Temperature Range for ° F
The temperature is set to ° F using the same temperature range switch as ° C.
Multi-input (Thermocouple/
Platinum Resistance
Thermometer)
Control mode switch 5: OFF
Set- ° F
ting
0 K -99 to 1999
1 0.0 to 199.9
2 J -99 to 1500
3 0.0 to 199.9
4 L -99 to 1500
5 T -99 to 700
6 0.0 to 199.9
7 U -99 to 700
8 N -99 to 1999
9 R 0 to 1999
Note: The control range for multi-input (thermocouple/platinum resistance thermometer) models is -40 to +40° F of each temperature range.
The previous name J-DIN has been changed to L in accordance with revisions to DIN standards.
(3) Setting Input Shift
Turn ON switch 4, and after turning ON the power, press the Mode
Key until h0 (indicates input shift of 0) is displayed. Press the Up and
Down Keys to set the shift value.
ON
1 2

5. Protect Switch

ON
Protect Switch
When the protect switch is ON, Up Key and Down Key operations are prohibited to prevent setting mistakes.
Temperature Controllers E5CSV
8
Temperature Controllers
3 4 5 6
Multi-input (Thermocouple/
Platinum Resistance
Thermometer)
Control mode switch 5: ON
Set- ° F
ting
0 Pt100 -99 to 1500
1 0.0 to 199.9
2 -99 to 99
3 0 to 200
4 0 to 400
5 JPt100 -99 to 900
6 0.0 to 199.9
7 -99 to 99
8 0 to 200
9 0 to 400
3 4 5 6
P X 1 2 3 4 5 6
E5CSV
Shift Example
Input shift display Measured temperature
h0 (no shift)
h9 (+9° C shift)
l9 (-9° C shift)
Note: When control mode switch 4 is turned OFF (no input shift
display), the input shift is not displayed but the shift value is
enabled. To disable input shift, set the input shift value to h0.
The shift range depends on the setting unit.
Setting unit
Compensation range -99 to +99° C
Input shift display
Temperature
display
100° C 100° C
100° C 109° C
100° C 91° C
1° C 0.1° C
-9.9 to +9.9° C
L99 to H99 L9.9 to H9.9
11